dmesg - HDD, raid10, wacache
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic.efi.signed root=/dev/mapper/iniinfratest--vg-root ro nomdmonddf nomdmonisw
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b9650fff] usable
BIOS-e820: [mem 0x00000000b9651000-0x00000000b9657fff] ACPI NVS
BIOS-e820: [mem 0x00000000b9658000-0x00000000ba0e9fff] usable
BIOS-e820: [mem 0x00000000ba0ea000-0x00000000ba5d6fff] reserved
BIOS-e820: [mem 0x00000000ba5d7000-0x00000000d7c2dfff] usable
BIOS-e820: [mem 0x00000000d7c2e000-0x00000000d7cbefff] reserved
BIOS-e820: [mem 0x00000000d7cbf000-0x00000000d7d26fff] usable
BIOS-e820: [mem 0x00000000d7d27000-0x00000000d7e69fff] ACPI NVS
BIOS-e820: [mem 0x00000000d7e6a000-0x00000000d9f48fff] reserved
BIOS-e820: [mem 0x00000000d9f49000-0x00000000d9ffefff] type 20
BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0xd7e2f000 ACPI=0xd7e2f000 SMBIOS=0xf04c0 MPS=0xfd440
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000058000) (0MB)
efi: mem02: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
efi: mem04: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem06: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001501000) (20MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000001501000-0x0000000002000000) (10MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003401000) (20MB)
efi: mem10: type=7, attr=0xf, range=[0x0000000003401000-0x00000000358d2000) (804MB)
efi: mem11: type=2, attr=0xf, range=[0x00000000358d2000-0x0000000036c61000) (19MB)
efi: mem12: type=7, attr=0xf, range=[0x0000000036c61000-0x0000000083cc1000) (1232MB)
efi: mem13: type=2, attr=0xf, range=[0x0000000083cc1000-0x00000000b6723000) (810MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000b6723000-0x00000000b9567000) (46MB)
efi: mem15: type=1, attr=0xf, range=[0x00000000b9567000-0x00000000b9651000) (0MB)
efi: mem16: type=10, attr=0xf, range=[0x00000000b9651000-0x00000000b9658000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000b9658000-0x00000000b97e4000) (1MB)
efi: mem18: type=3, attr=0xf, range=[0x00000000b97e4000-0x00000000ba0bb000) (8MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000ba0bb000-0x00000000ba0cc000) (0MB)
efi: mem20: type=3, attr=0xf, range=[0x00000000ba0cc000-0x00000000ba0de000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000ba0de000-0x00000000ba0e8000) (0MB)
efi: mem22: type=3, attr=0xf, range=[0x00000000ba0e8000-0x00000000ba0ea000) (0MB)
efi: mem23: type=6, attr=0x800000000000000f, range=[0x00000000ba0ea000-0x00000000ba5d7000) (4MB)
efi: mem24: type=4, attr=0xf, range=[0x00000000ba5d7000-0x00000000ba613000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000ba613000-0x00000000ca89c000) (258MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000ca89c000-0x00000000cb0ac000) (8MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000cb0ac000-0x00000000cb21f000) (1MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000cb21f000-0x00000000cb3f2000) (1MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000cb3f2000-0x00000000cb445000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000cb445000-0x00000000cb456000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000cb456000-0x00000000cb554000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000cb554000-0x00000000cb5cb000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000cb5cb000-0x00000000cb5e9000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000cb5e9000-0x00000000cb5ef000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000cb5ef000-0x00000000cb5f5000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000cb5f5000-0x00000000cb606000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000cb606000-0x00000000cb607000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000cb607000-0x00000000cb7e2000) (1MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000cb7e2000-0x00000000cb7e3000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000cb7e3000-0x00000000d4f63000) (151MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000d4f63000-0x00000000d4f66000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000d4f66000-0x00000000d4fa6000) (0MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000d4fa6000-0x00000000d4fa9000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000d4fa9000-0x00000000d4fb3000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000d4fb3000-0x00000000d4fb8000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000d4fb8000-0x00000000d4fc2000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000d4fc2000-0x00000000d4fc3000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000d4fc3000-0x00000000d4fd2000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x00000000d4fd2000-0x00000000d4fd3000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x00000000d4fd3000-0x00000000d6cf0000) (29MB)
efi: mem51: type=7, attr=0xf, range=[0x00000000d6cf0000-0x00000000d792e000) (12MB)
efi: mem52: type=3, attr=0xf, range=[0x00000000d792e000-0x00000000d7c2e000) (3MB)
efi: mem53: type=0, attr=0xf, range=[0x00000000d7c2e000-0x00000000d7c4f000) (0MB)
efi: mem54: type=0, attr=0xf, range=[0x00000000d7c4f000-0x00000000d7cbf000) (0MB)
efi: mem55: type=7, attr=0xf, range=[0x00000000d7cbf000-0x00000000d7d1d000) (0MB)
efi: mem56: type=2, attr=0xf, range=[0x00000000d7d1d000-0x00000000d7d27000) (0MB)
efi: mem57: type=10, attr=0xf, range=[0x00000000d7d27000-0x00000000d7e4f000) (1MB)
efi: mem58: type=10, attr=0xf, range=[0x00000000d7e4f000-0x00000000d7e52000) (0MB)
efi: mem59: type=10, attr=0xf, range=[0x00000000d7e52000-0x00000000d7e6a000) (0MB)
efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000d7e6a000-0x00000000d9d14000) (30MB)
efi: mem61: type=6, attr=0x800000000000000f, range=[0x00000000d9d14000-0x00000000d9d64000) (0MB)
efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000d9d64000-0x00000000d9d66000) (0MB)
efi: mem63: type=6, attr=0x800000000000000f, range=[0x00000000d9d66000-0x00000000d9ec9000) (1MB)
efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000d9ec9000-0x00000000d9ecb000) (0MB)
efi: mem65: type=6, attr=0x800000000000000f, range=[0x00000000d9ecb000-0x00000000d9f49000) (0MB)
efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000d9f49000-0x00000000d9f6d000) (0MB)
efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000d9f6d000-0x00000000d9fff000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x00000000d9fff000-0x00000000da000000) (0MB)
efi: mem69: type=7, attr=0xf, range=[0x0000000100000000-0x000000041fe00000) (12798MB)
efi: mem70: type=0, attr=0x8000000000000000, range=[0x00000000db000000-0x00000000df200000) (66MB)
efi: mem71: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem72: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem73: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z97-HD3/Z97-HD3, BIOS F6 06/11/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DC000000 mask 7FFC000000 uncachable
4 base 00DB000000 mask 7FFF000000 uncachable
5 base 041FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3504MB, range: 16MB, type UC
reg 5, base: 16894MB, range: 2MB, type UC
total RAM covered: 16302M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3504MB, range: 16MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 8GB, type WB
reg 7, base: 16GB, range: 512MB, type WB
reg 8, base: 16894MB, range: 2MB, type UC
e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd700-0x000fd70f] mapped at [ffff8800000fd700]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fdf000, 0x02fdffff] PGTABLE
BRK [0x02fe0000, 0x02fe0fff] PGTABLE
BRK [0x02fe1000, 0x02fe1fff] PGTABLE
init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
[mem 0x41fc00000-0x41fdfffff] page 2M
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
[mem 0x41c000000-0x41fbfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb9650fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xb95fffff] page 2M
[mem 0xb9600000-0xb9650fff] page 4k
init_memory_mapping: [mem 0xb9658000-0xba0e9fff]
[mem 0xb9658000-0xb97fffff] page 4k
[mem 0xb9800000-0xb9ffffff] page 2M
[mem 0xba000000-0xba0e9fff] page 4k
BRK [0x02fe3000, 0x02fe3fff] PGTABLE
init_memory_mapping: [mem 0xba5d7000-0xd7c2dfff]
[mem 0xba5d7000-0xba5fffff] page 4k
[mem 0xba600000-0xd7bfffff] page 2M
[mem 0xd7c00000-0xd7c2dfff] page 4k
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
init_memory_mapping: [mem 0xd7cbf000-0xd7d26fff]
[mem 0xd7cbf000-0xd7d26fff] page 4k
init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[mem 0xd9fff000-0xd9ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x358d2000-0x36c60fff]
ACPI: RSDP 00000000d7e2f000 000024 (v02 ALASKA)
ACPI: XSDT 00000000d7e2f080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000d7e3fb20 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000d7e2f1a0 01097D (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 00000000d7e68080 000040
ACPI: APIC 00000000d7e3fc30 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000d7e3fcc8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000d7e3fd10 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 00000000d7e40900 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000d7e40e40 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 00000000d7e419b8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000d7e419f8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000d7e41a30 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000d7e41da0 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: BGRT 00000000d7e47900 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 00000000d7e47938 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
NODE_DATA [mem 0x41fdf6000-0x41fdfafff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0009efff]
node 0: [mem 0x00100000-0xb9650fff]
node 0: [mem 0xb9658000-0xba0e9fff]
node 0: [mem 0xba5d7000-0xd7c2dfff]
node 0: [mem 0xd7cbf000-0xd7d26fff]
node 0: [mem 0xd9fff000-0xd9ffffff]
node 0: [mem 0x100000000-0x41fdfffff]
On node 0 totalpages: 4158784
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13727 pages used for memmap
DMA32 zone: 878499 pages, LIFO batch:31
Normal zone: 51192 pages used for memmap
Normal zone: 3276288 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb9651000-0xb9657fff]
PM: Registered nosave memory: [mem 0xba0ea000-0xba5d6fff]
PM: Registered nosave memory: [mem 0xd7c2e000-0xd7cbefff]
PM: Registered nosave memory: [mem 0xd7d27000-0xd7e69fff]
PM: Registered nosave memory: [mem 0xd7e6a000-0xd9f48fff]
PM: Registered nosave memory: [mem 0xd9f49000-0xd9ffefff]
PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88041fa00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4093776
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic.efi.signed root=/dev/mapper/iniinfratest--vg-root ro nomdmonddf nomdmonisw
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16057168K/16635136K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 577968K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 3600.196 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.39 BogoMIPS (lpj=14400784)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000d9e8c000 end: 0x000000d9e9afff
dmar: RMRR base: 0x000000db000000 end: 0x000000df1fffff
IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57603.13 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xb9651000-0xb9657fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xd7d27000-0xd7e69fff] (1323008 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 0:52:11, date: 03/08/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: SSDT 00000000d7c6ec18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000d7c6e618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000d7c6dd98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e19000-0xf7e197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e18000-0xf7e180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:04:00.0: [8086:107c] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf7ca0000-0xf7cbffff]
pci 0000:04:00.0: reg 0x14: [mem 0xf7c80000-0xf7c9ffff]
pci 0000:04:00.0: reg 0x18: [io 0xd040-0xd07f]
pci 0000:04:00.0: reg 0x30: [mem 0xf7c60000-0xf7c7ffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: [8086:107c] type 00 class 0x020000
pci 0000:04:01.0: reg 0x10: [mem 0xf7c40000-0xf7c5ffff]
pci 0000:04:01.0: reg 0x14: [mem 0xf7c20000-0xf7c3ffff]
pci 0000:04:01.0: reg 0x18: [io 0xd000-0xd03f]
pci 0000:04:01.0: reg 0x30: [mem 0xf7c00000-0xf7c1ffff pref]
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb9651000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba0ea000-0xbbffffff]
e820: reserve RAM buffer [mem 0xd7c2e000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7d27000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 4 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 5 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20028K (ffff8800358d2000 - ffff880036c61000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc689c000-0xca89c000] (64MB) mapped at [ffff8800c689c000-ffff8800ca89bfff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1425775930.452:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31815
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 7:915:859
rtc_cmos 00:06: setting system clock to 2015-03-08 00:52:11 UTC (1425775931)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880002734000 - ffff880002800000)
Freeing unused kernel memory: 696K (ffff880002b52000 - ffff880002c00000)
systemd-udevd[142]: starting version 204
md: linear personality registered for level -1
md: multipath personality registered for level -4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
md: raid0 personality registered for level 0
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
r8169 0000:02:00.0: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018c0000, fc:aa:14:01:c6:58, XID 0c900800 IRQ 47
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
md: raid1 personality registered for level 1
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19180 irq 46
ata3: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19200 irq 46
ata4: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19280 irq 46
ata5: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19300 irq 46
ata6: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19380 irq 46
raid6: sse2x1 10015 MB/s
raid6: sse2x2 11210 MB/s
usb 1-1: new high-speed USB device number 2 using ehci-pci
raid6: sse2x4 12372 MB/s
raid6: avx2x1 18564 MB/s
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
raid6: avx2x2 27568 MB/s
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
ata6.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0CB6Q, max UDMA/133
ata6.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
ata6.00: configured for UDMA/133
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 1:0:0:0: [sdb] Write Protect is off
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
raid6: avx2x4 31779 MB/s
raid6: using algorithm avx2x4 (31779 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
sde: sde1 sde2 sde3
sd 4:0:0:0: [sde] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
avx : 39456.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
systemd-udevd[144]: renamed network interface eth0 to p2p1
e1000 0000:04:00.0 eth0: (PCI:33MHz:32-bit) 90:e2:ba:92:45:83
e1000 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection
md: bind
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
random: lvm urandom read with 121 bits of entropy available
random: nonblocking pool is initialized
tsc: Refined TSC clocksource calibration: 3599.996 MHz
md: bind
md/raid0:md0: md_size is 1171871744 sectors.
md: RAID0 configuration for md0 - 1 zone
md: zone0=[sda2/sdb2]
zone-offset= 0KB, device-offset= 0KB, size= 585935872KB
md0: detected capacity change from 0 to 599998332928
e1000 0000:04:01.0 eth1: (PCI:33MHz:32-bit) 90:e2:ba:90:82:5b
e1000 0000:04:01.0 eth1: Intel(R) PRO/1000 Network Connection
systemd-udevd[147]: renamed network interface eth1 to p3p2
systemd-udevd[146]: renamed network interface eth0 to p3p1
md0: unknown partition table
bio: create slab at 1
Switched to clocksource tsc
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (278) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (292) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (294) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (296) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (298) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (300) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (302) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (304) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (306) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (308) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (310) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 16633852k swap on /dev/mapper/iniinfratest--vg-swap_1. Priority:-1 extents:1 across:16633852k FS
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sde2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sde2): mounted filesystem without journal. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): p3p2: link is not ready
systemd-udevd[474]: starting version 204
lp: driver loaded but no devices found
flashcache: module verification failed: signature and/or required key missing - tainting kernel
flashcache: flashcache-3.1.1 initialized
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4045e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4045e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 50 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
lp0: using parport0 (interrupt-driven).
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:17: registered as cooling_device14
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
type=1400 audit(1425775940.243:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=643 comm="apparmor_parser"
type=1400 audit(1425775940.243:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 comm="apparmor_parser"
type=1400 audit(1425775940.243:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=643 comm="apparmor_parser"
type=1400 audit(1425775940.243:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=729 comm="apparmor_parser"
type=1400 audit(1425775940.243:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
type=1400 audit(1425775940.243:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
type=1400 audit(1425775940.243:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 comm="apparmor_parser"
type=1400 audit(1425775940.243:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=643 comm="apparmor_parser"
type=1400 audit(1425775940.243:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
type=1400 audit(1425775940.243:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
r8169 0000:02:00.0 p2p1: link down
r8169 0000:02:00.0 p2p1: link down
IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
r8169 0000:02:00.0 p2p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
init: failsafe main process (834) killed by TERM signal
device-mapper: flashcache: Allocate 629596KB (22B per) mem for 29304832-entry cache(capacity:114472MB, associativity:512, block size:8 sectors(4KB))
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc2): VFS: Can't find ext4 filesystem
EXT4-fs (sdc2): VFS: Can't find ext4 filesystem
EXT4-fs (sdc2): VFS: Can't find ext4 filesystem
FAT-fs (sdc2): bogus number of reserved sectors
FAT-fs (sdc2): Can't find a valid FAT filesystem
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: flashcache: cache jobs 0, pending jobs 0
device-mapper: flashcache: cache queued jobs 0
device-mapper: flashcache: stats:
reads(1620082), writes(128646384)
device-mapper: flashcache: read hits(1592007), read hit percent(98)
write hits(106224190) write hit percent(82)
replacement(15819)
write invalidates(0), read invalidates(1)
device-mapper: flashcache: pending enqueues(0), pending inval(0)
no room(3)
device-mapper: flashcache: disk reads(28091), disk writes(106333306) ssd reads(1592007) ssd writes(128958068)
uncached reads(1), uncached writes(3), uncached IO requeue(0)
disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0)
uncached sequential reads(0), uncached sequential writes(0)
pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0)
device-mapper: flashcache: conf:
virt dev (cachetest), ssd dev (/dev/sdf), disk dev (/dev/md0) cache mode(WRITE_THROUGH)
capacity(114472M), associativity(512), data block size(4K) metadata block size(0b)
skip sequential thresh(0K)
total blocks(29304832), cached blocks(21403000), cache percent(73)
dirty blocks(0), dirty percent(0)
device-mapper: flashcache: nr_queued(0)
device-mapper: flashcache: Size Hist:
device-mapper: flashcache: 1024:1
device-mapper: flashcache: 4096:130257046
md0: detected capacity change from 599998332928 to 0
md: md0 stopped.
md: unbind
md: export_rdev(sda2)
md: unbind
md: export_rdev(sdb2)
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
md: bind
md: bind
md: bind
md: bind
md/raid10:md0: not clean -- starting background reconstruction
md/raid10:md0: active with 4 out of 4 devices
md0: detected capacity change from 0 to 599728848896
md: resync of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 585672704k.
md0: unknown partition table
md: md0: resync interrupted.
md: checkpointing resync of md0.
md: md0 still in use.
md0: detected capacity change from 599728848896 to 0
md: md0 stopped.
md: unbind
md: export_rdev(sdd2)
md: unbind
md: export_rdev(sdc2)
md: unbind
md: export_rdev(sdb2)
md: unbind
md: export_rdev(sda2)
md: bind
md: bind
md: bind
md: bind
md/raid10:md0: not clean -- starting background reconstruction
md/raid10:md0: active with 4 out of 4 devices
md0: detected capacity change from 0 to 599729897472
md: resync of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 585673728k.
md0: unknown partition table
md: md0: resync done.
RAID10 conf printout:
--- wd:4 rd:4
disk 0, wo:0, o:1, dev:sda2
disk 1, wo:0, o:1, dev:sdb2
disk 2, wo:0, o:1, dev:sdc2
disk 3, wo:0, o:1, dev:sdd2
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: table: 252:2: flashcache: flashcache: Disk device is busy, cannot create cache
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:2: flashcache: flashcache: Disk device is busy, cannot create cache
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:2: flashcache: flashcache: Cache device is busy, cannot create cache
device-mapper: ioctl: error adding target to table
device-mapper: flashcache: Allocate 498289KB (22B per) mem for 23193088-entry cache(capacity:90598MB, associativity:512, block size:8 sectors(4KB))
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
perf samples too long (2564 > 2500), lowering kernel.perf_event_max_sample_rate to 50000